Introduction to the hydraulic motor motorcycle with greater clamping force than MK III:
Accessories: Special bolt set – Compatible with 18 mm wide T-slot … 2 sets
Standard guide block (2 pieces per set) compatible groove width 18 mm … 1 set
Handles … 1 piece
Features:
– Total length 125 mm shorter and 7kg lighter weight than conventional type. There is also a malfunction prevention mechanism fitted with a manually operated hydraulic switch.
– Made of ductile iron, minimizing warping and cracking when tightened.
– The sliding parts are heat treated (HRC45) and have excellent wear resistance.
The hydraulic pump is perfected as a powerful clamping pump with very low failure rates from over 300,000 operational tests.
– Optimal grip from 3 positions is achieved by adjusting start and close start position.
High precision that surpasses previous JIS Grade 0 standards
Size chart:
Mã hàng | A | B | C | D | E | F | G | H | I | J | K | L | M | N | 0 | P | Q | R |
LTH3P-150S | 558 | 507-807 | 210 | 156 | 75 | 132 | 74 | 0 -300 | 18 | 89 | 163 | 100 | 100 | 190 | 97 | 17.5 | 18 | 14 |
Mã hàng
|
Độ rộng kẹp
|
Độ sâu kẹp
|
Độ mở kẹp
|
Độ rộng khối dẫn hướng
|
Lực kẹp KN
|
Trọng lương ( kg)
|
LTH3P | LTH3P-G | ||
Mã Số | Mã hàng | Mã Số | Mã hàng | |||||||
LTH3P – 150S | 156 | 57 | 300 | 18 | 40 | 41 | 67819 | LTH3P – 150S | 68833 | LTH3P – 150SG |
(
Lưu ý:
Compatible model
|
Code |
PLU
|
LTH3P-150S | 69390 | LTH3P150S-ASSY |
Reference page:
Hãy là người đầu tiên nhận xét “Hydraulic motorcycle with greater clamping force than MK III”